A hydraulic or automatic brick making machine can help you quickly produce thousands of bricks, quickly. These machines are great investments and here is more information about what to do once you purchase one in best interlocking bricks machine price so that you can make the highest quality bricks for any job.
Decide where you need to make the bricks. This is where you set up the machine for production. Be sure nothing else will obstruct its performance. Keep the machine and the mixing area under shade and be sure that you have a tap or tank of water to do the mixing and curing at another site nearby.
You must be sure the soil is made up of sand more than clay for best results. You can get more exact details from the brick molding machine for sale’s manual or from the manufacturer.
To start making the bricks, be sure the hole where you have dug for the soil is sieved to remove any large rocks. Now, choose the ratio of cement to use for the bricks. Once this is done you can start mixing. Use a container that holds as much cement as a typical bag does and only use one container at a time so that the contents are mixed completely. In general, interlocking brick machine is automatic brick making machine, you can check more: https://aimixphilippines.ph/automatic-brick-making-machine/.
At this point, you will add the water. Do this slowly, preferably with a watering can. This is where you need to judge if you have added plenty of water but not too much. Too much mixture makes the bricks fall apart and too much mater makes them crack. You can test the mixture by pressing your thumb into it. It should come away clean but your mixture should have enough give.
Now it is time to form the bricks. Put the mixture into the in the chamber for compression. The manufacturer will have already set it to compress at a specific measurement. Usually, this is 3 inches, but you can double check the manual. Compressing the wrong amount will affect the quality of the bricks made by fully automatic concrete machine.
You may also need to adjust the chamber to accommodate the type of soil which the mixture contains. The handle of the portable brick machine for sale should not go over the center of it. If it does, you have too much in the chamber. If you do not get the chamber to produce the right way, you will get bricks that are too thick.
You can always adjust the chamber to make the compression at a different strength to produce the right-sized brick. One online manufacturer explains that you need to turn the adjustment nut anticlockwise so you get the chamber area as small as it needs to be to produce a properly sized brick.
Let the bricks cure and then finish them. This happens when you transfer the molded products to a stacking machine. The final step is for the forklift you use to bring all the bricks to the drying field. Remember to water them the next day. In one week you will have the finished product ready to use for your construction needs.